trailer guides

Let's see what you're working on.
User avatar
Spongy
2019 Contributor
2019 Contributor
Posts: 87
Joined: Fri Feb 17, 2017 11:37 pm
Name: Ryan Von Lolhoffel
Vessel Name: Surreel
Vessel: 2017 240 OP
Location: Alaska

Re: trailer guides

Unread post by Spongy » Wed May 16, 2018 12:18 pm

The salt away is awesome. I bought the inline hose attachment with the reservoir and i'll rinse the whole outside of the boat and trailer, and then run some through the flush hook ups on my motors.
240 Ocean Pro ET HT
Single Yami F250 SHO
9.9 Yami High Thrust
Garmin 7607xsv
GT51M DownVu Transducer
Garmin GMR 18 xHD

billm
Egg
Egg
Posts: 14
Joined: Tue Jul 08, 2014 9:19 am
Name: Bill Macaras
Vessel: 180 Sportsman
Location: Lakebay, Wa

Re: trailer guides

Unread post by billm » Tue Jun 05, 2018 1:27 am

Hap, Sorry for not responding earlier. I use Salt Away on everything. Here is a breakdown of what I do. I run the motors on fresh water for about 5 minutes, then run Salt Away through the motors until I get foam on the ground, then stop the motors. I wash the boat down with soap and water, then rinse the boat, fishing rods, down riggers, outside of the motors, the bilge, and the hull (inside and out) with Salt Away. I even rinse off the truck tires and the trailer with Salt Away. I do this after each use in salt water. A little extra work but WELL worth it.
Last edited by billm on Sat Jun 30, 2018 11:29 pm, edited 1 time in total.

User avatar
SeaDawg
2019 Contributor
2019 Contributor
Posts: 416
Joined: Sun Oct 16, 2016 12:44 pm
Name: Hunter
Vessel Name: Vista Blue
Vessel: 2017-22 Ocean Pro-HT-ET
Location: Granite Falls, WA

Re: trailer guides

Unread post by SeaDawg » Tue Jun 05, 2018 7:06 pm

Salt Away is a great option...... but as a scuba diver, boat owner, dog owner and truck owner, my opinion is that HOT fresh water is the key to cutting salt from any equipment. I may totally wash and clean the boat twice a year. Otherwise when I get home I just totally rinse the boat, trailer, brakes, truck and gear with HOT water and then put it to bed. This easy maintenance is one of the main reasons that I went from a plastic boat to a metal boat.
2017 Ocean Pro 220 ET-HT
2017 Honda BF250 & 9.9 Power Thrust
Garmin 7610 MFD , 18HD Fantom Radar, ICOM VHF
Scotty 1106 DR's, Discovery Bay Pot Puller
ESPAR D4 Diesel Heater

"ALWAYS QUESTION AUTHORITY"

User avatar
schaeway
Alevin
Alevin
Posts: 32
Joined: Tue Nov 21, 2017 1:11 pm
Name: Rick Schaefer
Vessel: 220 Ocean Pro HT ET
Location: Aurora Or

Re: trailer guides

Unread post by schaeway » Wed Jun 20, 2018 6:05 am

No rubbing issues. I have mine set with about 2" of free space on each side once loaded and centered.

Post Reply